What it can do
- Automatic follow teleport with a separate, saved range for each paired Sub.
- Selectable Follow ranges from 5m to 100m.
- Fast same-region tracking based on the Owner's live position.
- Owner controls follow and teleports via a simple menu.
- Consent-based pairing: the Sub must accept the pairing request.
- RLVa blocks the Sub's own teleports while Follow is active, including Away mode.
- Manage up to 10 paired Subs with individual Follow states.
- No relay device required.
Requirements
- Owner wears the Owner HUD.
- Sub wears the SubFollow attachment, or uses the SubFollow script in another attachment such as a collar.
- All scripts must be running.
- RLVa must be enabled in the Sub viewer.
If RLVa is disabled or the SubFollow attachment is not worn, the Sub cannot be teleported.
How to wear it
First pairing (consent-based)
- Owner and Sub must be in the same region and within 20m of each other.
- Owner opens the Owner HUD menu and clicks Pair Sub.
- Sub receives a pairing request and must click Accept.
- After acceptance, the Sub is paired and can be managed from the Owner menu.
- Set the preferred Range, then enable following with Follow On or All Follow.
Pairing is token-protected and always requires the Sub's confirmation. A newly paired Sub starts with Follow OFF and the default 20m range.
Owner HUD menu
Typical buttons you will see:
What the buttons do
- TP Now: brings the selected Sub to the Owner's current location immediately.
- TP There: sends the selected Sub to a destination chosen by the Owner and uses Away mode when Follow is active.
- Range: sets the maximum Follow distance for the selected Sub.
- Follow On: enables Follow and the RLVa teleport lock for the selected Sub.
- Follow Off: disables Follow and releases the Follow-related teleport lock.
- All Follow: opens a submenu to turn Follow on or off for all paired Subs.
- Pair Sub: sends a pairing request. The Sub must accept.
- Switch Sub: selects a different paired Sub (multi-sub setups).
- Remove Sub: unpairs the selected Sub.
Set the Follow range
The range is the maximum distance the selected Sub may move away from the Owner before Follow teleports them back. Available presets:
5m10m15m20m
30m50m75m100m
- Select the Sub with Switch Sub.
- Make sure Owner and Sub are in the same region.
- Open Range and choose a value.
- Wait for the confirmation message. The setting is then saved for that Sub.
For security, a Range change is accepted only from the paired Owner HUD while Owner and Sub are in the same region.
TP There & Away mode
TP There can intentionally send a Sub away without Follow pulling them straight back.
- If Follow is ON, TP There pauses automatic recall for that Sub.
- The Owner HUD shows Follow: ON (Away).
- The Sub's own teleports remain blocked by RLVa while Away is active.
- TP Now brings the Sub back and resumes normal Follow.
- Follow also resumes automatically if the Owner joins the Sub's region. For a same-region TP There, the Owner must come within the selected range.
Away mode does not switch Follow off. Only Follow Off releases the Sub's Follow-related teleport restriction.
How it behaves
- If Follow is enabled, the Sub teleports after exceeding the selected 5-100m range.
- Inside the selected range, no Follow teleport is triggered.
- In the same region, distance is checked every 0.5 seconds using the Owner's current position.
- Across regions, SubFollow continues through the secure server connection.
- While Follow or Away is active, the Sub cannot use normal map, landmark, location or teleport-offer teleports. Owner-issued SubFollow teleports still work.
- The Owner can disable Follow at any time using Follow Off.
Troubleshooting
Problem: Sub does not teleport
- Confirm RLVa is enabled in the Sub viewer.
- Confirm the SubFollow attachment is worn and all scripts are running.
- Confirm the Sub accepted the pairing request.
- Confirm Follow is enabled (Follow On or All Follow).
- Try TP Now once to verify basic teleport works.
Problem: Pair request never appears
- Make sure the SubFollow attachment is worn and not blocked or muted.
- Pair in the same region and stay within 20m.
- Try again: Owner clicks Pair Sub, Sub accepts.
Problem: It does not follow even though follow is on
- Check you selected the correct Sub (Switch Sub) if you manage multiple Subs.
- Check the selected Sub's current Range value.
- Confirm the distance is greater than that value.
- If the HUD shows ON (Away), use TP Now or join the Sub as described above.
Problem: Range does not change
- Owner and Sub must be in the same region.
- Confirm the correct Sub is selected.
- Wait for the confirmation message before closing the menu or trying again.
Problem: The Sub cannot teleport while Follow is on
- This is expected: the RLVa teleport lock is part of Follow and remains active in Away mode.
- Use the Owner HUD's TP Now or TP There controls, or choose Follow Off to release the lock.
Problem: Sub removed the HUD and follow stopped
- Re-attach the SubFollow Script.
- If pairing was cleared, pair again: Owner uses Pair Sub and Sub accepts.
Important notes
- The system works only while the SubFollow Script is attached and running.
- The system cannot teleport offline avatars.
- The HUD menu opens only when touched; it does not open automatically after login.
- Use responsibly and with consent.